The model also supports micro SD / SDHC / SDXC up to 256GB. The device also comes with a 1 / 1.8 "Progressive Scan CMOS that gives us 2688 × 1520 pixels at 25fps, 120dB WDR, Darkfighter technology, H.265 +, H.265, H.264 + and H.264 compression.
The unit size is 138.3 × 125.2 mm, weighs 575g and has a working temperature of -30 to 60C. The 4mm version we use in this test has a horizontal field of view of 94 ° and a vertical field of view of 49 °. The model can be purchased in different lens versions - options include 2.8, 4 and 6mm, with an aperture of F1.0. On that if one installs this unit close to a neighbor that the LED does not bother the other household as the unit has an extremely powerful LED lamp built into it.
#Hikvision darkfighter review full
If you have no light sources, then the device's LED lamp will be able to help and thereby make the image razor sharp and in full color. It is extremely good for reproducing color at night - the picture will only be better if you have some artificial light in the form of lampposts or outdoor lighting around the house.
The camera is suitable for and will be placed under overhangs or on the house wall. Including things like message triggers, face detection, motion detection (based on pixel changes that can be set up in terms of detection area and sensitivity) as well as multi-streams (one stream can be in very high quality for recording video on your NVR (Network Video Recorder), while another stream may be of lower quality, to enable faster access from mobile devices). The camera has a comprehensive list of configuration options. After the SADP configuration, you can now enter the IP address of the device in a web browser to get to the login page and continue the installation of the camera. Simply launch the SADP (Search Active Devices Protocol) tool from the Hikvision website. Once the camera is installed and connected to a PoE (Power over Ethernet) wired network connection, configuring the camera is straightforward. Finally, the white round cover clicks on the camera again and the device is now ready for configuration.
#Hikvision darkfighter review install
If you want and install an SD card in the device, you can loosen the two screws that sit over the lens and insert the card and the screws are tightened again. When the unit is located at the desired location and the camera is properly adjusted, the safety screw is tightened so that the unit can no longer be rotated. Then drill through the relevant positions marked on the sticker. Hikvision encloses a drilling template, which you hold against the surface where you want to mount the camera. The installation of the camera itself is pretty straightforward. We have now hit 2021 and Hikvision has now updated the device with latest generation 2 algorithm which has a 98% accuracy in identifying objects.Īfter unpacking the device, we see the familiar materials that Hikvision always encloses in their products.ġ x bag with umbraco key and cleaning clothġ x bag with sealing materials for when you need to connect the network cable so that it is waterproof up to the device With ColorVu, you can identify the objects much better, as the device shows full colors at night. maj 2021 The private sector really got their eyes on ColorVu in 2020 and the demand has been there ever since.
0 kommentar(er)
